LT 443D-CS
Analog Composite Unit

→ To the Product Inquiry Form

The LT 443D-CS Analog Composite Unit adds the NTSC/PAL analog composite signal output capability to the LT 443D mainframe. Various functions (e.g., ID character, simple motion pictures, embedded audio, NATURAL picture pattern *1) are provided.
*1 The NATURAL picture function is only usable when the LT 443D-70 Option is installed in the mainframe.

Test Signal Output
Format	NTSC NTSC + REFERENCE *2 NTSC + ID *3 NTSC + REFERENCE + ID *2*3 NTSC + SETUP NTSC + SETUP + REF *2 NTSC + SETUP + ID *3 NTSC + SETUP + REF + ID *2*3 PAL *4 PAL + REFERENCE *4*2 *2 REFERENCE and REF denote Field Reference. *3 ID denotes 10 field ID. *4 The 25-Hz offset subcarrier is used for the PAL system.
Pattern	(1) COLOR BAR 100 % ----- (White: 100 %, Color saturation: 100 %) (2) COLOR BAR 75 % (NTSC only) ----- (White: 100 %, Color saturation: 75 %) (3) EBU COLOR BAR (PAL only) (4) BBC COLOR BAR (PAL only) (5) SMPTE COLOR BAR (NTSC only) (6) FLAT FIELD 100 % (7) FLAT FIELD 50 % (8) FLAT FIELD 0 % (9) CROSS HATCH 1 ----- (NTSC: 16 lines [H], 17 lines [V] PAL: 19 lines [H], 17 lines [V] ) (10) CROSS HATCH 2 ----- (NTSC: 13 lines [H], 17 lines [V] PAL: 13 lines [H], 17 lines [V] ) (11) LINE SWEEP 100 % ----- (0.5 to 5.6 MHz, Marker: 1.0, 2.0, 3.0, 4.0, 5.0 MHz) (12) LINE SWEEP 60 % ----- (0.5 to 5.6 MHz, Marker: 1.0, 2.0, 3.0, 4.0, 5.0 MHz) (13) MULTI BURST 100 % ----- (0.5, 1.0, 2.0, 3.0, 4.0, 5.75 MHz) (14) MULTI BURST 60 % ----- (0.5, 1.0, 2.0, 3.0, 4.0, 5.75 MHz) (15) SHALLOW RAMP (16) 10 STEP (17) MOD 10 STEP (18) RAMP (19) MOD RAMP (20) MONOSCOPE (NORMAL/INVERT) (21) RED RASTER (Color saturation: 75 %) (22) WINDOW (23) PULSE & BAR ----- (NTSC: 2T pulse, 12.5T pulse, 2T bar) ----- (PAL: 2T pulse, 20T pulse, 2T bar)
NATURAL Picture *5	Up to five screens of 24-bit full color BMP file can be simultaneously switched. *5 The Option LT 443D-70 should be installed in the mainframe to enable this function.
APL	MODE: APL OFF, APL HIGH, APL LOW, APL (BOUNCE), BOUNCE APL (BOUNCE) is switched at a preset time interval for APL HIGH and APL LOW. BOUNCE is switched at a preset time interval for FLAT FIELD 100 % and FLAT FIELD 0 %. Time Interval: 1 to 20 seconds (settable in one second steps)
ID Character	Number of Characters: Up to 20 Size: 32 x 32 dots, 64 x 64 dots, selectable Display Position: Arbitrary position on the screen. Blinking: OFF, 1 to 10 seconds (settable in one second steps)
Simple Motion Picture Function	Direction: 8 directions (up, down, left, right, and combinations) Speed H: 0 to 256 dots in 4 dot steps V: 0 to 256 lines in 2 line steps (Pattern can be scrolled in field time steps.)
Timing Variable	The timing of OUTPUT 1 and 2 can be varied simultaneously. H-PHASE: Up to 1 line-1 dot Resolution: Variable in 1 dot steps (corresponding to 27 MHz clock frequency) V-PHASE: Up to 1 frame-1 line Resolution: Variable in 1 line steps F-PHASE: NTSC: Up to 5 frames PAL: Up to 2 frames Resolution: Variable in 1 frame steps
Number of Outputs	2

Black Signal Output
Format	Depends on the test signal format. (Supports the Field Reference and 10 field ID)
Output Signal	Analog black burst
Timing Variable	The timing of OUTPUT 1 and 2 can be varied simultaneously. H-PHASE: Up to 1 line-1 dot Resolution: Variable in 1 dot steps (corresponding to 27 MHz clock frequency) V-PHASE: Up to 1 frame-1 line Resolution: Variable in 1 line steps F-PHASE: NTSC: Up to 5 frames PAL: Up to 2 frames Resolution: Variable in 1 frame steps
Number of Outputs	2 systems (one each)
Signal Level	1 Vp-p (into 75 )

Horizontal Drive Pulse Output
Format	Depends on the test signal format.
Signal Level	2 Vp-p (into 75 )
Signal Polarity	Negative
Timing Variable	H-PHASE: Up to 1 line-1 dot Resolution: Variable in 1 dot steps (corresponding to 27 MHz clock frequency)
Number of Outputs	1

Vertical Drive Pulse Output
Format	Depends on the test signal format.
Signal Level	2 Vp-p (into 75 )
Signal Polarity	Negative
Timing Variable	V-PHASE: Up to 1 frame-1 line Resolution: Variable in 1 line steps
Number of Outputs	1

Environmental Conditions
Operating Temperature Range	0 to 40 °C
Operating Humidity Range	90 % RH (without condensation)
Spec Guaranteed Temperature Range	10 to 35 °C
Spec Guaranteed Humidity Range	85 % RH (without condensation)
Operating Environment	Indoor use
Operating Altitude	Up to 2,000 m
Overvoltage Category	I
Pollution Degree	2

Power Source	Supplied by the LT 443D mainframe
Dimensions	79 (W) x 41 (H) x 371 (D) mm (excluding projections)
Weight	Approx. 0.4 kg