LEADER ELECTRONICS CORP.
Top > Product Line > LT 443D-SD/SDB SD-SDI Unit

Broadcast Products

Plug-In Units for LT 443D

LT 443D-SD/SDB
SD-SDI Unit

LT 443D-SD

→ To the Product Inquiry Form

LT 443D-SDB : This generator has all of the features and functions of the LT 443D-SD plus two SD-SDI black outputs.

GENERAL

The LT 443D-SD SD-SDI Unit adds the 525/625 line format SD-SDI signal (4:2:2 component signal) output capability to the LT 443D mainframe. Various functions (e.g., ID character, simple motion pictures, embedded audio, NATURAL picture pattern*1) are provided.
*1 The NATURAL picture function is only usable when the LT 443D-70 Option is installed in the mainframe.
Specifications
(LT 443D-SD)
SD-SDI Video Output
  Number of Outputs 1 system, 2 outputs (75 , BNC)
  Specifications Conforms to ITU-R BT. 601, SMPTE 125M standards
Conforms to ITU-R BT. 656, SMPTE 259M standards
  SDI Characteristics
Bit Rate: 270 Mbps
Output Amplitude: 800 mVp-p 10 %
Overshoot: 10 %
Rise and Fall Time: 0.4 to 1.5 ns (20 % to 80 %)
DC Offset: 0 V 0.5 V
Output Impedance: 75
Return Loss: 15 dB (5 MHz to 270 MHz)
Function
  Applicable Format 525i/59.94 to 270 MHz, 625i/50 to 270 MHz
  Test Patterns  (1) COLOR BAR 100 %
    (White: 100 %, Color saturation: 100 %, Setup: 0 %)
 (2) COLOR BAR 75 % (Applicable to 525i/59.94)
     (White: 100 %, Color saturation: 75 %, Setup: 0 %)
 (3) EBU COLOR BAR (Applicable to 625i/50)
 (4) BBC COLOR BAR (Applicable to 625i/50)
 (5) SMPTE COLOR BAR (Applicable to 525i/59.94)
 (6) RAMP & COLOR
     (525: Over size ramp, 75/0/75/0 SMPTE color bar)
     (625: Over size ramp, 100/0/75/0 EBU color bar)
 (7) FLAT FIELD 100 %
 (8) FLAT FIELD 50 %
 (9) FLAT FIELD 0 %
(10) FIELD ID
(11) CROSSHATCH
      (Number of Lines   525: 16 [H], 17 [V], 625: 19 [H], 17 [V] )
(12) LINE SWEEP 100 %
(13) LINE SWEEP 60 %
(14) MULTI BURST 100 %
(15) MULTI BURST 60 %
(16) OVER SIZE RAMP
(17) DIGITAL LIMIT RAMP
(18) SHALLOW RAMP
(19) 10 STEP
(20) CHECK FIELD (Conforms to SMPTE RP-178 standards)
(21) MONOSCOPE (NORMAL/INVERT)
(22) BOWTIE 100 % (Marker resolution: 20 ns)
(23) PULSE & BAR
      (525: 2T pulse, 12.5T pulse, 2T bar)
      (625: 2T pulse, 20T pulse, 2T bar)
(24) RED RASTER (Color saturation: 100 %)
(25) MULTIPULSE
  NATURAL Picture*2
File: 24-bit full color BMP file
(720 x 487, 720 x 576)
Number of Selectable Patterns with PATTERN Key: 5
 
*2   The Option LT 443D-70 should be installed in the mainframe to enable this function.
  Variable Timing Variable Range: Entire frame range
Variable In
   V: Line steps
   H: Clock steps (27 MHz)
  Simple Motion Picture Mode
  (Scroll)
Direction: 8 directions (vertical, horizontal, diagonal)
 
Speed (Range, Resolution)
  Field Frame: Variable in field steps
  V: 0 to 256 lines in 2 line steps          
  H: 0 to 256 dots in 4 dot steps
  ID Character
Number of Characters: Up to 20
Size: 32 x 32 dots, 64 x 64 dots, selectable
Display Position: Arbitrary position on the screen.
Blinking: OFF, 1 to 10 seconds 
(settable in one second steps)
  Logo Logos created in BMP file can be displayed at the arbitrary position on the screen. 
  Embedded Audio
Number of Channels
Embedded:
 
8 channels (4 channels x 2 groups)
Each group can be set ON/OFF respectively.
Sampling Frequency: 48 kHz (sync to video signal)
Resolution: 20 bits, 24 bits, selectable
Preemphasis: OFF, 50/15 , CCITT, selectable
(CS bit is only selected.)
Frame Number: ON/OFF, selectable
Frequency: 50, 100, 150, 200, 250, 300, 400, 500, 600,
750, 800, 1.0 k, 1.2 k, 1.5 k, 1.6 k, 2.0 k, 2.4 k,
3.0 k, 3.2 k, 4.0 k, 4.8 k, 5.0 k, 6.0 k, 8.0 k,
9.6 k, 10 k, 12 k, 15 k, 16 k, 20 kHz, silence
Level: -60 to 0 dBFS (settable in 1 dB steps)
Audio Click: 1, 2, 3, 4 sec, none

*Frequency, level, and audio click can be set to each channel. 
*When the CHECK FIELD pattern is selected, no audio signal is embedded.
Environmental Conditions
  Operating Temperature Range 0 to 40 °C
  Operating Humidity Range 90 % RH (without condensation)
  Spec Guaranteed 
  Temperature Range
10 to 35 °C
  Spec Guaranteed 
  Humidity Range
85 % RH (without condensation)
  Operating Environment Indoor use
  Operating Altitude Up to 2,000 m
  Overvoltage Category I
  Pollution Degree 2
Power Source Supplied by the LT 443D mainframe
Dimensions 79 (W) x 41 (H) x 371 (D) mm
(excluding projections)
Weight Approx. 0.4 kg
      ←Back to LT 443D