LV 5152DA
HD DIGITAL WAVEFORM MONITOR

Download details (PDF:159KB)


*OPTION 70: NTSC input
*PATENTED: Equivalent cable length measurement
*The cabinet is sold separately.

LV 5152DA HD-SDI Monitor Conforming to 720p, 1080i, and 1035i Standards
Digital Data Dump Function, Gamut Error Monitoring Function

The LV 5152DA HD Digital Waveform Monitor is designed to display 720p, 1080i, 1035i-line serials digital signal and analog signals. This instrument features two serial digital input systems and one analog component signal input system. In addition to the waveform monitor function, vector, bowtie, and audio signal display functions are provided.
Digital input signal can be analyzed since transmission error monitoring function, equivalent cable length measurement function, and digital video data dump function are provided.

Option 70: Waveform monitor function for NTSC component and composite signal is optionally equipped as factory option (No vector display)

• Two serial digital input systems and one output system
  Serial digital signal input systems conforming to BTA S-004B standards; active output system to resend the input signal.
• Analog signal input system (Y, PB, PR or GBR)
  This input system enables the monitoring of both analog and digital signals since the analog input is provided.
• Digital data dump function
  Since parallel digital video data can be displayed in hexadecimal format, this instrument is convenient to trace troubles.
• Equivalent cable length measurement
  Indicates the serial digital signal level applied to the input connector as the coaxial cable (LS-5CFB) length instead of the actual level.
• Digital audio output conforming to SMPTE 276M
  Digital audio signal separated from the serial digital signal can be output.
• Digital input error monitoring function
  Error logger function and contents display function of HD-SDI are provided.
• Gamut error monitoring function
  Monitors incorrect level of signals converted from Y, PB, PR into GBR format.
• Vectorscope function (SMPTE 240M, 274M)
  Displays color difference signal in vector format.
  The analog GBR signal is converted into color difference signal with a matrix and displayed in vector format.
• Picture monitor output
  A D/A converter converts a serial digital signal into an analog signal , which is then output to the picture monitor.
  Y, PB, PR or G, B, R format can be selected.
  Input analog signals are directly output in analog mode.
• Conversion matrix, Y, PB, PR into GBR (SMPTE 240M, 274M)
  Simplifies signal level monitoring.
• Full-line selector mode
  Enables the selection and display of arbitrary video signal lines in each field. Since up to 15 lines can be continuously displayed, waveform is displayed with sufficient intensity.
• Measurements using cursor
  Ensures level measurement with 0.5% accuracy.
• Lissajous display for stereo audio signal
  Analog stereo audio signal can be displayed in lissajous format.
• Preset memory function
  Stores/recalls up to 10 panel settings to reduce setup time by presetting frequently used measurement conditions.
• Timing display
  Time difference and amplitude difference between channels can be monitored by using the timing display mode.