• 3G SDI
  • HD SDI
  • SD SDI

Customize with a rich array of options

  • General
  • Option
  • Download

The LV 5770A is a multi monitor that can be customized with a variety of units to meet your needs.
The LV 5770A is highly cost effective because it supports full-format 3G-SDI, HD dual link, HD-SDI, and SD-SDI signals. The LV 5770A has a variety of features including simultaneous monitoring of two SDI signals, SDI signal frame capture, lipsync measurement, Pic Moni Output, and improved flexibility in laying out the display, all of which provide you with leading-edge technology.

(Display Examples)

22-channel simultaneous display
(with the installed LV 5770SER08, LV 5770SER09A, and LV 5770SER41/43)
5 bar display
(with the installed LV 5770SER08 and LV 5770SER09A)
Loudness display
(with the installed LV 5770SER43)
Eye pattern display
(with the installed LV 5770SER09A)


  • XGA Display and DVI-D Output
    The LCD display is a 6.3-inch XGA screen (the effective resolution is 1024 × 768). In addition, the screen images are transmitted from a DVI-D connector that supports single link TMDS, so the screen image can be displayed larger than is possible on the LV 5770A through the use of an external LCD monitor display.
  • Pic Moni Output
    The input SDI signal can be generated as a Pic Moni Output signal. (This requires the LV 5770SER08 option or the LV 5770SER09A option.) However, analog composite input (LV 5770SER03A) cannot be generated as a Pic Moni Output signal.
  • Frame Capture and Screen Capture Features
    The LV 5770A is equipped with a frame capture feature, which captures single frames in an SDI signal. Frames can be captured manually or automatically when errors occur. This feature is suitable for performing data analysis when errors occur. The LV 5770A is also equipped with a screen capture feature, which captures the entire display as still-image data.
  • External Control Connectors
    The LV 5770A has two external control connectors: an Ethernet port and a remote control connector. Connecting the LV 5770A to a PC through the Ethernet port makes it possible to control the LV 5770A over HTTP. The remote control connector can be used to load presets, switch the input signal, and transmit errors.
  • Headphone Output (6.3 mm)
    The headphone jack can be used to monitor audio. (This requires the LV 5770SER41/43 optional unit.)
    TRI SYNC and composite signals are supported.
  • LV 5770SER08 | SDI INPUT*
    The 3G, HD dual link, HD, and SD-SDI formats are supported. Two inputs can be displayed overlaid or side by side. Two input SDI signals can be generated from two outputs. Also, input A or B, whichever is selected, can be generated as a Pic Moni Output signal.
  • LV 5770SER09A | SDI INPUT/EYE*
    In addition to the LV 5770SER08 features, eye patterns can also be displayed.
    (The eye pattern display can be used on one of the two input SDI signals that you select.)
  • LV 5770SER41 | DIGITAL AUDIO (Loudness feature)
    Embedded audio and external digital audio are supported.
    (The eight I/O connectors—16 channels—are switched between input and output in groups of four connectors—8 channels.)
    Up to 8 channels of analog audio are supported.
    (The LV 5770A must be combined with the LV 5770SER41/43 unit.)
  • LV 5770SER43 | DIGITAL AUDIO (Loudness with 8ch Level Meter)
    16 channe Digital Audio input (Future)
    Loudness Measurement for Two Signals
  • * The LV 5770SER08 and LV 5770SER09A cannot be installed in the LV 5770A at the same time.

External Drawing
Instruction Manual
LV5770A Firmware Ver.2.4
Member only
Frame Capture Viewer Ver.1.52
Member only

Login to My Leader is required to download some technical information.

If you have my Leader account, please login from below, if you do not have an account, please create an account and login to my Leader.